Adelphi Cabinetry

Cabinet Boxes

3/4" solid wood Face Frames, using Mortise & Tenon construction.
Birch (Natural finish) interiors.  Matching interior available for extra fee.
3/4" Birch plywood sides.
1/2" Birch plywood bottoms.
1/4" Birch plywood backs on Base cabinets.
1/4" Birch plywood tops and backs on Wall cabinets.
1/8" curved plywood backs are used on most Corner Wall and Rotating Corner Bases.
*  Bottoms, backs, tops, end panels, and face frames are assembled in the tongue & groove technique.  
3/4" Birch veneered, particleboard core shelves.  (Natural finish only)
3/4" Plywood shelves are optional..
*  Shelving is adjustable using a ‘peg-in-hole’ linebore system.

Recessed Toe Kicks are considered unfinished parts. Adelphi advises using a wood toebase molding or some type of covering material be used to complete a finished appearance on the installation.

Drawer Boxes

5/8" Maple, true dovetailed drawer boxes.
1/4" Birch Drawer bottoms dadoed into solid stock maple sides.
Undermount drawer slides, MEPLA full extension, soft close design.